Best Dam Gutter Plus® charges $16–$20 per linear foot for aluminum gutters, $65–$70 for copper, and $75–$80 for steel. These company prices give you a practical starting point for planning your gutter installation cost. Your written estimate will confirm the material, measured footage, and work included for your property.
For a home needing 150 feet of aluminum gutters, Best Dam Gutter Plus®’s $16–$20 per-foot range produces a calculated subtotal of $2,400–$3,000. The final project total depends on the agreed scope. Confirm how downspouts, removal, repairs, and other work are handled in your estimate rather than assuming the per-foot rate includes every component.
The most useful price is one tied to a defined project. A partial installation on a simple roofline is different from replacing every gutter and downspout on a two-story home. Start with Best Dam Gutter Plus®’s material-specific rates, then have the team measure your St. Louis or Belleville property and define the work.
Ask for an estimate that identifies the measured gutter footage, material, size, and profile, along with the downspout quantities and discharge locations. Confirm whether removal, cleanup and any fascia repairs are included. That makes the final total easier to compare with another contractor’s proposal.
The table below lists Best Dam Gutter Plus®’s prices per linear foot for the three gutter materials it offers. Use these rates to compare material options, then request a written estimate that confirms the specifications and inclusions for your home.
| Material | BDGP price per linear foot |
| Aluminum | $16–$20 |
| Steel | $75–$80 |
| Copper | $65–$70 |
A per-foot price is only comparable when both estimates include the same work. One contractor may quote the gutter run separately from downspouts; another may bundle components into the project total. Ask which approach is being used before multiplying the rate by your roofline footage.
The following examples multiply gutter footage by Best Dam Gutter Plus®’s aluminum rate of $16–$20 per linear foot. They are calculated planning examples, not completed customer projects or guaranteed final quotes. Your estimate will confirm any included or separately priced downspouts, removal, repairs, guards, drainage work, and taxes.
| Gutter footage | Aluminum subtotal at $16–$20/ft |
| 100 feet | $1,600–$2,000 |
| 150 feet | $2,400–$3,000 |
| 200 feet | $3,200–$4,000 |
Calculated subtotal = measured gutter footage × the applicable BDGP per-foot rate. For 150 feet, aluminum comes to $2,400–$3,000, copper to $9,750–$10,500, and steel to $11,250–$12,000. If removal or downspouts are priced separately in your proposal, add those line items once. If they are included in the quoted package, do not count them again.
A 2,000-square-foot home does not automatically need 200 feet of gutters. Floor area describes living space; gutter footage describes the roof edges that need drainage. Roof shape, stories, additions, and which eaves receive gutters determine the measurement.
At Best Dam Gutter Plus®, aluminum gutters cost $16–$20 per linear foot, making aluminum the lowest-priced of the company’s three material options. Aluminum is lightweight, corrosion-resistant, and available in different colors and profiles. Seamless aluminum gutters can be formed to fit long roof runs, reducing the number of joints along those runs. Corners, outlets, and end caps still require proper detailing. Compare metal thickness, finish, and attachment specifications as well as price.
Best Dam Gutter Plus® charges $75–$80 per linear foot for steel gutters. Steel is stronger and heavier than aluminum, while the exact product and protective finish determine its corrosion resistance and maintenance needs. Installation details, cut edges, and finish condition affect long-term performance. Ask the team to specify the steel product and finish in your estimate.
Best Dam Gutter Plus® charges $65–$70 per linear foot for copper gutters. Copper’s appearance, changing patina, and specialized fabrication can make it appropriate for architectural projects where the gutter system is part of the home’s design. Compare the complete system—including compatible hangers, outlets, and downspouts—rather than pricing the gutter trough alone.
They can. A larger profile may require additional material, a different fabrication setup, and changes to outlets or downspouts. However, each contractor sets its own pricing, and a business may offer an upgrade within a package. Confirm any current upgrade offer in writing rather than assuming that 6-inch gutters always cost more or are always available at the same price.
Best Dam Gutter Plus®’s guide to 5-inch versus 6-inch gutters discusses their performance differences. Capacity also depends on profile, gutter pitch, roof drainage area and the outlets and downspouts serving the run. Choose a size around the water the system must handle; a larger trough alone will not resolve every drainage bottleneck.
Two homes needing 180 feet of gutter can have very different installation requirements. A single-story ranch with long, straight runs may be easier to access than a two-story home with dormers, additions, and multiple corners. More transitions mean more measuring, cuts, joints, and installation work.
Roof valleys can concentrate runoff at particular locations, while steep roof planes may change how water enters the gutter. A site assessment should consider those conditions before a contractor recommends a layout. The goal is to install enough capacity in the right places, not simply to match the old gutter footage.
Downspouts and outlets: Quantity, size, elbows, and extensions affect components and labor. The downspout sizing and drainage guide explains why the gutter and discharge system need to work together.
Removal and disposal: Taking down an existing system adds work. Confirm whether the estimate includes hauling away old materials and cleaning the work area.
Fascia repairs: Gutters need sound backing. If the wood behind the existing system deteriorates, repairs may be needed before installation. Ask how concealed damage will be documented and priced if it becomes visible after removal.
Height and access: Upper stories, landscaping, limited equipment access, and nearby obstructions can affect the time and equipment required.
Guards and drainage work: Gutter protection, extensions, and underground drainage connections can add separate costs. Ask which items are necessary for the proposed system and which are optional.
Compare specifications and scope before comparing totals. The lowest estimate may describe less footage, smaller downspouts, or different exclusions; a higher estimate should explain what additional work or specification it includes. Price alone does not establish workmanship or value.
The checklist below makes differences easier to spot. Ask for written answers and clarify any allowance for hidden repairs. For existing systems, the gutter repair versus replacement guide can help frame the discussion about whether a full replacement is necessary.
| Compare | What to request in writing |
| Gutter specification | Material, thickness, size, profile, and seamless construction |
| Downspouts | Size, count, outlets, and discharge locations |
| Existing conditions | Removal, fascia work, and concealed-damage process |
| Project scope | Access, cleanup, guards, drainage, and taxes |
| Warranty | Covered components, labor, exclusions, and claims process |
Read warranty terms carefully. Confirm whether coverage applies to materials, installation labor or both, who handles a claim, and what maintenance or exclusions apply. A broad warranty label is less informative than the written terms.
Best Dam Gutter Plus® charges $16–$20 per linear foot for aluminum, $65–$70 for copper, and $75–$80 for steel. Request a written estimate that confirms gutter footage and explains which components and services are included in the project total.
The living area alone is insufficient to calculate the cost. Measure the roof edges receiving gutters, then account for stories, corners, downspouts, and project scope. The 100-, 150-, and 200-foot examples show the calculation once the footage and rate are known.
They may be, but contractor packages and promotions vary. Ask for the quoted price, the downspout configuration, and any upgrade conditions. The appropriate size should reflect the roof’s drainage needs.
Aluminum is the most affordable gutter material offered by Best Dam Gutter Plus®, at $16–$20 per linear foot. Choose the material and system specifications that fit your property, drainage needs, and budget.
Some do, and others price them separately. Have the contractor identify inclusions in writing. This avoids comparing a gutter-run subtotal with someone else’s complete-system proposal.
For a useful local estimate, start with a professional gutter installation assessment. Best Dam Gutter Plus® can review the roofline, gutter size, downspout placement, and existing conditions on your St. Louis or Metro East property. Ask for a proposal that explains the system and the work behind the total.
Talk to our gutter team to request an estimate for your property.
Belleville | Swansea | Fairview Heights | Shiloh | O’Fallon, IL | Smithton | Freeburg | Red Bud | Mascoutah | Caseyville | Millstadt | New Athens | Lebanon | East St. Louis | Marissa | Lenzburg
Edwardsville | Collinsville | Granite City | Alton | Wood River | Maryville | Troy | Godfrey | Glen Carbon | Highland
Columbia, IL | Waterloo | Valmeyer
St. Louis | Chesterfield | Clayton | Kirkwood | Wildwood | Fenton | Maryland Heights | Ballwin | Creve Coeur | Webster Grove | Brentwood | University City | Manchester | Ladue | Hazelwood | Bridgeton | Affton | Maplewood | Sunset Hills | Overland | Richmond Heights | St. Ann | Crestwood | Berkley | Earth City | Glendale | Lemay | Breckenridge Hills | Des Peres
